The freely configurable A.E.B. MP48 OBD Set is the further development of the established AEB2001N system. It is suitable for all 3-4 cylinder engines with sequential injection.
The compactly built control unit is easy to install even where space is limited.
During operation, the control unit measures the injection times and the gas pressure and calculates the optimal dosing time and quantity.
A diagnostic system is integrated in the control unit of the A.E.B. MP48 OBD itself, which monitors the function and status of the other gas components during installation and operation. The results can be called up via the calibration software. This option can prevent malfunctions and facilitates troubleshooting and error correction.
The calibration tool provides instructions to simplify system installation and setup.
You can download the installation instructions free of charge.
You can download the software for free.
- freely configurable
- OBD-II Connection
- Diagnosis of the other gas components
- Measurement of injection times in real time
- waterproof 48 pin wiring harness
- compact architecture
Scope of Delivery
- A.E.B. MP48 OBD control unit 3-4 cylinders
- A.E.B. MP48 wiring harness 3-4 cylinders
- A.E.B. MP01 MAP Sensor
- A.E.B. Switch
- Small parts bag
|Plug connection||IP (6K9K) incl. water protection and lever system|
|Supply voltage||Vbatt = 10 / 16V|
|Operating temperature||-40 / 110 °C|
|Current consumption with locked drives||Imax = 0,5 A|
|Power consumption in standby mode||Istandby = 5 µA|
|Up to 4 gas injectors with the following features||
Imax = 6
Vbatt, max = 16 V
2 power outputs for gas solenoid valves
|Power and maximum current for each output with two activated outputs||
Pmax = 25 W
Lmax = 2 A
|Power and maximum current with only one output||
Pmax = 50 W
Lmax = 4 A
|MAP-Sensor||Original sensor of the vehicle|
|Gas temperature sensor||
A.E.B. sensor (4.7 kOhm – included in PT MAP sensor)
Sensor (2.2 kOhm)
|Water temperature sensor||4K7 (Original sensor)|
A.E.B. Level sensor
A.E.B. Linear (Cartesio)
0 – 90 Ohm standard sensor (not standard inverted)
0 – 1 V
0 – 5 V
5 – 0 V
0.8 – 1.6 V
UEGO (linear sensor in current)