The freely configurable A.E.B. MP32 Set is a very compact control unit "Made in Italy" and is perfectly suited for installation in difficult space conditions.
The installation is possible in all 3-4 cylinder vehicles with sequential injection.
The control unit measures the injection times and the gas pressure, from which the optimum dosing time and quantity is calculated.
A diagnostic system is integrated in the compact control unit of the A.E.B. MP32, which measures the status of the other gas components during installation and operation. The results can be retrieved via the A.E.B. calibration software. Malfunctions can be prevented in advance by the diagnostic system. In addition, troubleshooting and correction is made easier.
The calibration tool provides instructions to simplify system installation and setup.
You can download the installation instructions free of charge.
You can download the software for free.
- freely configurable
- diagnosis of the other gas components
- waterproof 32 pin wiring harness
- compact architecture
Scope of Delivery
- A.E.B. MP32 control unit 3-4 cylinders
- A.E.B. MP32 wiring harness 3-4 cylinders
- A.E.B. MAP-sensor
- A.E.B. Switch
- Small parts bag
|Plug connection||IP (6K9K) incl. water protection and lever system|
|Supply voltage||Vbatt=10 / 16V|
|Operating temperature||-40 / 110 °C|
|Current consumption with locked drives||Imax = 0,5 A|
|Power consumption in standby mode||Istandby = 10 µA|
|Up to 4 gas injectors with the following features||
Imax = 6
Vbatt, max = 16 V
2 power outputs for gas solenoid valves
|Power and maximum current for each output with two activated outputs||
Pmax = 25 W
Lmax = 2 A
|Power and maximum current with only one output||
Pmax = 50 W
Lmax = 4 A
|MAP-Sensor||Original sensor of the vehicle|
|Gas temperature sensor||
A.E.B. sensor (4.7 kOhm – included in PT MAP sensor)
Sensor (2.2 kOhm)
|Water temperature sensor||4K7 (Original sensor)|
A.E.B. Level sensor
A.E.B. Linear (Cartesio)
0 – 90 Ohm standard sensor (not standard inverted)
0 – 1 V
0 – 5 V
5 – 0 V
0.8 – 1.6 V
UEGO (linear sensor in current)