LPG-FIT thermoplastic hose is a precisely fitting alternative to LPG filling hoses made of rubber.
Instead of pre-cut filling hoses with pressed fittings, we deliver LPG-FIT filling hoses as meter ware (maximum 200 meter roll) with separate fitting set. This allows you to react flexibly depending on the installation situation and enables a precisely fitting installation of the LPG hose. In addition, by saving on various pre-assembled gas hoses, you reduce your stock on a long-term basis and at the same time increase your available range.
|Inner core||Nylon (Polyamide 6)|
|Bond||chemically bonded inner core and reinforcement|
|Outer cover||nylon (polyamide 6), black|
|Inner diameter||9.7 mm|
|Outer diameter||13.7 mm|
|Bending radius||100 mm|
|Burst pressure||370 Bar|
|Working pressure||90 Bar|
|Working temperature||-40°C to +125C|
LPG filling hoses
LPG filling hoses serve as refuelling line for liquid gas between the external refuelling (filler neck, refuelling nozzle, filling valve) and the 4-hole LPG tank, vapour gas tank, gas bottles with 80% fill stop or other refillable LPG (propane/butane) cylinders.
The hose, homologated according to ECE 67 R standard, is either pre-assembled rubber hose available in lengths from 0.25 to 3.00 metres (one size every 0.25 metres) The 1/2″ union nut connections seal conically and are available in both straight and 90° angled versions.
It also exists as a cut-to-size flexible hose with a maximum roll length of 200 metres. Matching fitting sets are available in both straight and 90° angled versions.
We look forward to hearing from you
Do you have any questions or suggestions?
Please contact us. We will be happy to help you.